Necessary Inspection Before Starting The Battery Locomotive, Come In And See

In recent years, there are more and more accidents of explosion-proof battery locomotive. In order to avoid personal injury during the operation of underground mining locomotive, it is necessary to conduct a comprehensive inspection before the operation of locomotive.

Check whether the battery locomotive has complete safety device, bell, lamp, protective cover, brake brake, coupling, leakage and circuit protection device. If any item is abnormal, it is not allowed to operate. Check whether the lever and pin shaft of the brake system are in good condition and the action is flexible.

Check the wear condition of brake shoe, replace the over worn brake shoe; check the clearance between brake shoe and wheel tread, if it exceeds the specified value, adjust it in time; remove the dirt on the screw rod and brake shoe.

Check whether the bolts and cotter pins of the vehicle body and all parts are complete, whether the bolts are tightened, and whether the connection between the pin shaft and the cotter pin is good. In particular, the device for hanging traction motor shall be inspected carefully.

Check whether the battery locomotive bolts and cotter pins of the vehicle body and each part are complete, whether the bolts are tight, and whether the pin shaft and cotter pins are well connected. In particular, the device for hanging the traction underground mining locomotive motor should be carefully checked.

Check whether the coupling battery locomotive is in good condition.