11 Inspection Items For Electric Locomotive Operators To Pay Attention To

What should the mine electric locomotive operator pay attention to when handing over shifts? Today, the editor of locomotive will talk about 11 inspection items that operators of mine electric locomotive must pay attention to:

1. Inspection of the livestock battery department of coal mine battery locomotive:

2. Whether the rotating controller is naive, and experiment with various contact points, and whether the contact is excellent. Can the alarm be excellent?

3. Whether the storage of sand in the sandbox is boring and sufficient, and whether the action of removing sand and installing is naive (do not remove too much sand during inspection).

4. Overhead electric locomotive: The collector should be lowered first, the main switch should be opened, and the battery locomotive should be unplugged and cut off the power supply.

5. Whether the battery locomotive connection between the battery and the circuit is excellent.

6. Whether the lifting and lowering of the current collector is naive, and whether it has sufficient elasticity to comply with the highest and lowest errors of the wiring.

7. It is necessary to judge whether the voltage of the battery can reach the allowable discharge value according to the communication situation of the succeeding battery locomotive driver.

8. Check whether the joint of the mechanical department of the battery locomotive is excellent, and whether the screws of each part are loose.

9. Check whether the fuel capacity of the electric locomotive is sufficient, whether the connectors and contacts are damaged, whether the lighting is intact, and whether the switch is naive.

10. Whether the battery locomotive box cover can be closed properly, whether the box cover and the frame are reliable, and whether the pins can be inserted properly.

11. Make a starting experiment and a braking experiment for the last time.