Operation Essentials Of 'Finger Dictation'By Electric Locomotive Driver

Electric locomotive drivers have five major operating methods, including thought, sight, fingers, dictation, confirmation, and remarks.

1. Quiet
Check the brakes, lighting, horn sanding installation, adjoining installation, connection and loading conditions of the Battery Locomotive brakes, lights, horns, sanding installation, adjoining installation, vehicle brakes, horn, sanding installation, adjoining The installation and vehicle are intact and reliable, and the confirmation is over.

2.Start
Whether there are obstacles and pedestrians in front of the electric locomotive, and whether the turnouts and signals are accurate. Obstacles, pedestrians, vehicles, turnouts, and signals. There are no obstacles in front of the vehicle, pedestrians, turnouts, and the signals are accurate. Confirmation is over.

3.Operation
Whether there are obstacles and staff in front of the battery locomotive, whether the turnouts are accurate, whether there are roadway intersections, whether there are turning obstacles, pedestrians, vehicles, turnouts, roadway intersections, turning concentrated physical bodies, maintaining the distance between vehicles, inspecting signals, Pay attention to pedestrians, obstructed lines, turns, turnouts, and roadway intersections to slow down and confirm the end.

4.Stop midway
Whether the controller can return to the zero position, whether the brakes can be braked tightly, whether the lights can be turned to the rear light controller, the brakes, the light controllers return to zero, the brakes are tightened, and the lights turn to the rear lights, confirm end.

5.Parking
Whether the controller can be returned to zero position, the brake can be locked, the power can be cut off, the operating handle can be removed from the controller, the brake, the power switch, the operating handle controller returns to zero, brake the brake, The power is cut off, the handle is removed and carried, and the confirmation is complete.

Clarify:

1. Before driving the battery locomotive, conduct a general inspection of the locomotive. If problems are found, they must be dealt with before driving. When driving, look forward and backward, and there must be no staff or other obstacles in front of the vehicle.

2. During the driving process, you should look at the signal to drive, and when you find obstacles, pedestrians, curves, lane crossings and other factors affecting the driving in front of you, you should slow down and sound a warning.

3. When parking, you must first hit the control handle to the zero position, brake the brakes, and remove the handle but not turn off the lights.

Mantra:

Get a good rest before the job, check first when driving the battery locomotive, check the signal when it is running, concentrate, cut off the power when parking, brake the brakes tightly, and carry the handles with you.