How To Ensure The Safety Of Mining Electric Motor Vehicles?

Mine electric motor vehicles are mainly used in coal mines. In coal mines, explosions and roof accidents are often reported. The reason is that the motor vehicle transportation management is weak. In order to prevent the tragedy from happening again, the driver is using the electric motor vehicle to transport. Should comply with the transport rules and regulations, what are the rules and regulations when using electric motor vehicles?

1. Trains or individual locomotives must have front lighting and red lights. In normal operation, the locomotive must be at the front of the train. Non-motorized vehicles must not be driven on the same section of the track. If you need to drive, you must go through the underground transportation dispatching station to agree.

2. The damper that the train passes must have a device that can receive sound and light signals on both sides of the damper when the train passes. Road signs and warning signs should be installed in the roadway. When the locomotive line is close to the roadway, the diverticulum, the curve, the ballast, the slope is large or the noise is large, and there are obstacles in front of the vehicle or the line of sight, the speed must be reduced and a siren should be issued.

3. The regulations for sending emergency stop signals with miner's lamps must be used. No one should use the emergency stop signal in a non-hazardous situation. When two locomotives or two trains are traveling in the same direction of the same track, they must maintain a distance of not less than 100m. The locomotive driver must follow the signal to drive and must signal the drive before driving. During the operation of the locomotive, it is strictly forbidden to control the head or body outside the vehicle. When the driver leaves the seat, the motor must be turned off, the control handle should be removed, and the brakes must be tightened, but the lights must not be turned off.

4. The braking distance of the train shall be measured at least once a year, no more than 40m when transporting materials, and no more than 20m when transporting personnel. In the section where the curve or the driver's line of sight is blocked, the train busy signal should be set. Do not allow the top car (if the special situation requires the top car, the speed is slow, there must be a chain chain in front of the command, and the chain of the mining machinery mine car is locked).

5. Before driving, the driver must check the stability and reliability of the large parts installed on the vehicle. After confirming that the driver can drive, the driver must drive at low speed and steady. In the newly built or renovated large-scale mine bottom yard and transportation lane, a signal centralized occlusion system should be set up.

Therefore, in order to protect the safety of themselves and others, the driver should keep in mind the rules and regulations of the motor vehicle transportation before operating the mining motor vehicle.