How To Maintenance Work Of Battery Electric Locomotive

In the previous article, we talked about nine maintenance work points of battery electric locomotive. Now, we will continue to see other maintenance work points of battery electric locomotive.

10. Check the contact of the regulator and clean the dirt on the surface of each mechanical component.

11. Clean, oil and lubricate the oil filling points with the specified grease according to the specified time.

12. Check that the fasteners are fully tightened.

13. Check the wiring terminals and resistance components of the resistors, and do not loose or break.

14. Check whether the terminals of the controller are loose or not, and whether the contacts are burnt or not. In particular, the contacts with frequent movements should be inspected and maintained.

15. After the underground mining locomotive is out of service, immediately check the traction motor and the bearing oil tank. The motor temperature must not exceed the manufacturer's specifications, remove the dust from the fuel tank, and regularly fill the oil and change the oil.

16. For the luminosity of the headlights, replace the damaged lamp and fuse, the capacity of the fuse must meet the requirements.

17. The underground mining locomotive should check whether the connection between the pin and the power supply is firm and the explosion-proof performance is good.

The role of the underground mining locomotive is very large, but we must also operate safely, so that it can work with high efficiency and no hidden troubles!