Basic Operating Requirements For Trolley Electric Locomotive

The operation of the trolley electric locomotive is critical to the service life and safety of the locomotive. If the driver is not trained, he will make wrong judgments and operations when encountering dangerous situations, so the driver's operation training requirements must be strict.

The following are the basic requirements for drivers who operate trolley electric locomotive:

1. After receiving the start signal, start to operate the master controller to the corresponding forward or reverse gear. Sound the whistle first, then release the hand brake and operate the master controller handle to increase the locomotive speed to the driving speed at a constant speed. It is strictly forbidden to drive without releasing the brakes, and it is strictly forbidden for drivers to drive outside the vehicle.

2. Narrow gauge locomotive Drivers must pass training and examinations and be certified.

3. When driving a narrow gauge locomotive, it is strictly forbidden to leave the work post without authorization, and it is strictly prohibited to leave the driver's cab while driving or when the vehicle is not stable. When leaving the driver’s cab, you must cut off the power supply, remove the master controller key, and tighten the brakes, but you cannot turn off the lights. Where there is a slope, use wooden wedges to wedge the wheels.

4. Shift requirements. The locomotive driver on duty must inform the driver in detail about the operation of the vehicle, line conditions, and signal conditions, and the driver on duty must carefully inspect the vehicle.

5. Connect electrical circuits in order, start electrical meters, instruments, light up lights, and red tail lights.

The basic requirements of these five-point operation trolley electric locomotive must be strictly implemented. Can deal with general emergencies.